You are here
Home > android >

{100% Working} How to flash Tambo TA-1 & Tambo TA-1 flash file

How to flash Tambo TA-1

Tambo TA-1 you’ll easily solve any problem with this method if you’re a fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB isn’t working. if A battery isn’t charged, your USB socket won’t properly work and you’ll fail during this method. if any issues please write your questions within the comment box I will be able to try my best to assist you. 

Also read:

How to unlock bootloader of Panasonic P65

How to block Youtube channels for kids

How to hard reset smartwatch forget password

This method is often used with none box it’s done from the flash tool it is also available here, and it’s important to install the phones driver, you cannot flash or upgrade if it’s not installed on your computer or laptop it must be installed and also available during this post, here all are linked that tested and dealing fine just in one try

Tambo TA-1 wants to repair this device, an attempt to repair it by self. need to charge A battery with any charger and charged it by 90%. Your data is extremely important for therefore it’s good to try to do a backup of knowledge it’s going to contain contact details, important messages, emails, or the other important thing which feels to be the backup during a device.

 This backup is often done on another device. we’ve to try to do the backup because after a format of a tool, all data are going to be gone and it’ll not be recovered. For backup in other devices, you’ll use another external device like a disk drive, SD card, or other suitable devices. I do by own. roll in the hay at your own risk as we do not take any responsibility if a tool is broken 

Download Links:

ambo TA-1 Flash File (Stock ROM)
Download

Tambo TA-1 USB Driver and Flash tool

This Tambo TA-1 flash file is tested by me and it’s working alright with none error, can use this flash file when the device can use this guide when the device in Remove Virus, pattern lock, hard reset, flashing, software update, update, format, reset, phone lock, sim lock, pattern reset, pin lock, flash, hang on logo, the only logo solve, hang logo solution, hang problem, firmware update, pattern lock, pattern unlock, pattern reset, phone lock, phone reset, format, hang on logo done, sim lock, screen lock, screen unlock, pin lock, stuck on logo done, user name password id problem, fix unfortunately app has stopped, unfortunately, app has stopped working, unfortunately, app store has stopped, unfortunately, apps have stopped, unfortunately, your app has stopped, auto activate internet connection, auto activate WiFi connection, auto app installing, auto went balance, etc these type issues can use this manner, etc. 

This is often used with none tool and box. and also free for all who has knowledge about software in mobiles. for flashing files, it’s most vital to first check the micro USB cable. if it’s not good, can’t flash it. and therefore the other one is to see the device battery. it shouldn’t below, it can stop the device between flash. before the flash, it’s necessary to save lots of data like contacts, photos, videos, and other important things.

Requirements:

  1. Tambo TA-1 device with at least 80% battery 
  2. Tambo TA-1 flash file
  3. Tambo TA-1 USB Driver
  4. Tambo TA-1 Flash tool
  5. A USB cable 
  6. Laptop or computer

How to flash Tambo TA-1:

  1. First of all, you need to download the flashing tools from the above links.
  2. Now extract the downloaded files on your computer using any og the extracting software like WinRAR.
  3. Open MDT-SMT-1.1.0-0904 folder and click on “360OS-MDT-SMT.exe” file.
  4. Enter Username: admin and Password: 123456
  5. Click on “sel” button and choose “TAMBO_TA-1_8.0.022.P1.18091320.CMT6739RAM1G.BW_Tambo_CMT6739RAM1G_OE.NOEFUSE.CPB” file from “TA-1_Go_V09_Indian” folder.
  6. Now click on the “scan_port” button.
  7. Then just click on the “Scan” button and insert a USB cable into the phone
  8. After that tool automatically take the phone to any “cell” number (Mediatek USB drivers must be installed on your computer or pc)
  9. Then hit on the “Save” button
  10. Now just click on the “Start” button and connect the USB cable to the phone
  11. Wait until the flash is completed.

Also read:



Leave a Reply

Top